HEPA Air Purifier

Pur Line

PL3000

INSTRUCTION BOOKET

Please read this booklet carefully and keep it in a safe place for future reference.

WinEurope - France

PURE AIR FOR YOUR ENHANCED COMFORT AND SAFETY

By choosing a PURLINE air purifier, you have selected a unit that features leading-edge technology for combating all forms of airborne pollution.

Incorporating various stages of filtration: dust filter, BIOSTOP® screen/HEPA filter, active carbon filter, negative ionizer etc., this unit provides you with a source of superior air quality.

This unit has been manufactured with care and will meet with your complete satisfaction if used according to the advice shown in this booklet.

This silent unit:

- Neutralises airborne particles and odours.

- Acts effectively on bacteria, viruses, microbes, mould and germs etc.

SAFETY PRECAUTIONS

Always plug the unit in to a wall outlet, never use an extension cord.
Switch off, then unplug the air purifier each time that you wish to stop or move the unit, change the filter or clean it.
Do not insert foreign objects in to the air purifier, such as metal rods, for example.
Do not operate the air purifier if there is a component missing or if it is damaged.
This unit should not be used in a small enclosed space.
This unit is not intended for outdoor use.
Never allow children to play with the purifier or place objects on to the unit.
Never use the air purifier in the presence of oxygen or any other flammable gases.
Never immerse the unit in water (or spray it) when cleaning.
If the power cord is damaged, it should be replaced by the manufacturer or by a qualified person.

HOW YOUR PURLINE AIR PURIFIER WORKS

Dirty, dust-laden air is drawn through the right-hand side of the unit. It then passes through a dust filter that captures large particles such as fluff, hair, pollen, dust and animal fur etc.
The effective HEPA filter is precise up to 99.97% on any remaining micro particles and is able to trap particles as small as 0.03 microns.
The active carbon filter removes odours and toxic gases through its absorption process.

4. The unit is equipped with a negative ion emitter, which further enhances the cleaning of the air through the electrostatic precipitation of small airborne particles.

DESCRIPTION OF UNIT

A. Air outlet

B. Fragrance cartridge protective grill

C. Fragrance cartridge.

D. Processing unit

E. Active carbon filter

F. Cold catalysis filter

G. HEPA filter with BIOSTOP screen

H. Dust filter

I. Air inlet grill

CONTROL PANEL:

“ON/OFF” BUTTON:

Press this button to turn on or switch off the unit.

“Speed” BUTTON:

The fan speed of the unit can be adjusted when the unit is in operation (L M H). Each time that you press on the (SPEED/ON) button, the speed is adjusted from L (low) to M (medium) to H (high).

When the unit is switched on it is automatically positioned in L (low) mode.
To change this speed, press on the SPEED/On button again. The red warning light indicates the selected speed.

“Timer” BUTTON:

By pressing this button, the purifier can be timed to operate for intervals of 1 hour, 2 hours, 4 hours and 8 hours, stopping automatically when the selected operating time has elapsed.
Press this button (Timer) to select the required operating time. A warning light automatically indicates the remaining operating time.
To select the continuous operating mode, press the button repeatedly until there are no more amber indicator lights lit up.

“ANION" BUTTON: NEGATIVE ION SOURCE

A feature of the air purifier is the incorporation of a negative ion generator. Negative ions help clean the air by the electrostatic precipitation of small airborne particles. If the unit is close to a wall and/or in a polluted environment some deposition of particles by this process will occur and may accelerate the natural darkening of the immediate environment.

When the unit is not in use, switch it off and unplug it.

All of these functions can be selected via remote control

PRE-OPERATING INSTRUCTIONS

When removing the unit from the packing case, check for any shipping damage. Please contact your shipper and dealer immediately if the unit bears any sign of damage from mishandling. All PURLINE units are carefully inspected before leaving the factory. The unit can be positioned vertically or horizontally (on a flat surface).

KEEP SHIPPING PACKAGING for use in the event that your unit needs servicing. (If this unit is shipped without the original packing, damage could occur and void the warranty).

PLEASE FAMILIARISE YOURSELF WITH THE FOLLOWING PROCEDURES BEFORE OPERATING YOUR NEW AIR PURIFIER.

OPERATING INSTRUCTIONS.

1. Remove the HEPA, active carbon and dust filters. After removing any plastic wrapping, re-install the filters in accordance with the instructions set out in the “Filter Replacement” section.

2. After installing the filters, choose a suitable location to position the unit.

3. Press grill “B” to install the fragrance unit “C” if it is required. If you wish to use essential oils, place a small cup or receptacle in the compartment.

4. Plug the unit in.

5. See “control panel” section (above) for details on the various features.

CARE AND CLEANING

PLASTIC HOUSING – Dirt, dust or spots can be wiped away with a damp soft cloth and non-abrasive cleaner. Treated with care, this high quality air purifier will retain its attractive appearance for many years.

The pre-filter can be cleaned with a vacuum cleaner and can also be washed in cold water.

WARNING: Do not wash the HEPA and carbon filters; these are disposable items.

FILTER REMPLACEMENT

To keep your unit operating at peak efficiency, the HEPA and active carbon filters should be replaced regularly. These filters have been designed with large filtration surfaces and may last from six months to two years under normal conditions of use. The rate at which the filter clogs with polluting particles depends on the volume and quality of the air being filtered. If the unit is used continuously on high speed in a room with a strong concentration of contaminants, then the service life of the filter will be shortened. In a cleaner environment, mainly operating at lower speeds, the filter will last longer.

REPLACING THE FILTERS (Ref. PUR 405)

1. Switch off and unplug the unit.

2. Press on the lower right catch to release the grill.

3. Carefully unpack the new filters, removing the protective wrapping.

4. Place the new filters in to their housing compartments: the carbon filter (black) should be installed first in to the rear housing compartment, then the HEPA filter and finally the dust filter, before re-attaching the grill.

[text in speech box:] The HEPA filter should be positioned opposite the front panel, the carbon filter should be positioned opposite the internal panel of the unit

TECHNICAL SPECIFICATIONS

MODEL PL3000

Negative Ionization 3.0 x 10.6 ions/cm3

Power supply 220 / 240 50 Hz

Dimensions (cm) 33 x 16 x 30

Wight (net) 4, 37 Kg

Output (max.) 120 m3 / h

Electrical consumption (max.) 40 Watts

Replacement filters Ref. Pur 405

(for HEPA, carbon and dust filters )

Fragrance Ref. Pur 435

(lemon sample : 55 g)

MINI TROUBLESHOOTING GUIDE

Before carrying out any of the following service checks, unplug the unit from the mains.

Insufficient air flow

Check that the filters are clean

Check for any obstructions in the air inlet and outlet

Unit will not start

Check the power supply and electric fuses.

Excessive noise

Check for any foreign objects in contact with the fan.

The filter may be clogged and ready for replacement.

The foam sealing gaskets have been installed incorrectly.

Uneven positioning.

Warranty: 2 years as from the date of purchase

FOR ANY WARRANTY CLAIMS, PLEASE RETURN YOUR UNIT OR SEND IT WITH FREIGHT PREPAID TO YOUR DEALER, TOGETHER WITH YOUR PROOF OF PURCHASE.

Label for recording the filter replacement date

ENTER THE INSTALLATION DATE OF THE NEW FILTER

_____________ ___________ ___________

Day Month Year

Place this label inside the unit.