EN

DECONTAMINATING PURLINE AIR PURIFIER

With the BIOSTOP screen and HEPA filter

 

PLS2100BM BioStop

 

Unit with the biological and sterilizing screen BioStop®.

 

Greatly Improves Indoor Air Quality.

Therapeutic performances.

 

 

  

 

The BioStop biological and sterilizing screen has been proven effective on bacteria, viruses, moulds, germs…which can contribute to contaminations, allergies, asthma, cardiovascular troubles, pneumonia, etc.

 

 

 

OWNER’S MANUAL

 

Important ! Read and Save these instructions.

 

WinEurope S.A FRANCE

Email : info@purline.com

Internet : www.purline.com

 

 

AIR PURIFYING WILL IMPROVE YOUR  INDOOR AIR QUALITY AND COMFORT.

By choosing a  PURLINE air purifier you have acquired one of the finest air purifier on the market today. With its multi-stage filtering system:  a pre-filter, the BIOSTOP shield /active carbon /HEPA filter, negative ionization, it will greatly improve your indoor air quality.

 

This air purifier has been carefully manufactured. With normal care and maintenance, it will provide many years of satisfactory performance.

 

This unit

-         Is very effective against airborne particles and odours

-         Stops viruses, bacteria, germs, moulds, etc.

-         Runs quietly

 

Safety instructions

 

-       Plug and unplug unit with dry hands.

-          Plug your unit directly into an electrical outlet, DO NOT USE with an extension cord.

-          The unit should always be switch off then unplugged, when not in operation, while being cleaned or when changing the filter.

-          Do not insert any objects into the openings of the air purifier, especially metallic ones.

-          Never use air purifier if any part is missing or damaged in any manner.

-          This unit must not be used in a narrow, closed area.

-          This unit is not intended for outdoor use.

-          Do not let children use the air purifier, never put anything on top of the unit.

-          Never use the air purifier in the presence of oxygen or any flammable materials.

-          This unit should not be cleaned under running water or immersed in water or sprayed with water.

-          Should the power supply cord be damaged return the unit to the manufacturer or any qualified agent or service centre for repair or replacement.

-           

How your PURLINE air purifier works

  1. Your air purifier draws unclean air through the unit front panel. This air is then passed through a washable pre-filter which retains larger particles including human and animal hair, pollens, dust, fluff etc.
  2. The BIOSTOP shield has been proven effective on moulds, viruses, bacteria which are generating sources of allergies, cardiovascular troubles, asthma, pneumonia, contamination, etc.
  3. The HEPA filter is effective at capturing 99,97% of airborne particles as small as 0.3 microns from the air that passes through the air purifier.
  4. The active carbon filter is particularly effective on smoke and odours.
  5. Negative ionization attach to the very small particles which adds to the performance of the air purifier.

 

Description

Air Intake Grille (front panel): the air is drawn to the front of the unit.

 

 Ionizer Indicator Light: It will illuminate when the ionizer is activated.

 

 Air Outlet Grille :The purified air goes back into the room through the Vertical Air Outlet Grille.

 

CONTROL PANEL

SPEED/ON KEY.

  1. Use this key to SWITCH ON the air purifier.
  2. You will also use the SPEED/ON key  to adjust the speed. To set the speed press the key once for Low speed (L), once again for Medium speed (M), and again for High speed (H). (This can be done while the unit is running.)
  3. When the unit it Switch ON , it automatically sets on Medium speed(M) for about 2 seconds, then it will go to Low (L). This is normal.
  4. To change speed press the SPEED/ON key  again Set the speed control to the most comfortable setting. The red LED shows the required speed.

 

TIMER  (Timer HR)

  1. The unit can be set to run for 1, 2, 4, 8hours or continuously. It automatically stops when the required time has been reached.
  2. Press the timer key to get the required length of running time. A pilot light shows the remaining running time.
  3. For a continuous functioning mode press until the green light is off.

 

Negative Ions Source

One of the unit feature is the ionizer: by emitting negatively charged electrons which attach to the very small particles passing through the filter it helps to purify the air even more.

Dirt and dust might settle on the unit and on the surface near it due to the ionization process.

 

OFF Key

Press that key to switch off the air purifier, if you do not use the unit for a while please turn it off and unplug it.

 

Installation

  1. Unpack the air purifier check it. If it has been damaged in anyway please advise immediately the shipper or the dealer . All PURLINE units are carefully inspected before leaving the manufacture.
  2. Please keep the packaging you could need it to send back the unit in case of malfunctioning. If not sent back in its original box the unit could be damaged and the warranty voided.

 

PLEASE READ ALL FOLLOWING INSTRUCTIONS BEFORE  USING YOUR AIR PURIFIER.

 

Box contents :

  • Unit with BIOSTOP / ACTIVE CARBON /HEPA filter ( In a plastic wrapping).
  • Small plastic bag with 2 screws and 2 anti-vibrations sponges for possible wall set up.
  • Sticker to record date of HEPA filter replacement.
  • Owner’s manual.
  • One extra self-adhesive Control Panel for inverted wall set up.

 

Operating instructions

  Unpack an remove all packing material.

1.      Remove Air-Intake Grille, unfold power supply cord , let it into special opening at the unit base. Remove the plastic bag from the BIOSTOP/active carbon/HEPA filter , then replace filter (see Filter replacement) and Air-Intake Grille.

2.      Pick a suitable location for the unit.

3.      For regular use set the unit on a flat, stable surface ( table, low piece of furniture). For smoke, select a wall set up about 1,50 meter to 2 meters high.

 

      

 

WALL SET UP

·        Select a location near an electrical wall outlet.

·        Put 2 nails or 2 wooden screws into wall ,see  1st diagram :

·        The unit is set up upside down, you will need to stick extra “Control Panel” on existing panel, see 2nd diagram.

 

Diagram 2

·        Set both anti-vibrations sponges on 2 corners at the back of the reversed unit, see 3 rd diagram.

 

Diagram 3

·        Unravel necessary length of power supply cord, set it in special slot, see 4th diagram(Put remaining length of cord into its location).

Diagram 4

·        This is how the air purifier looks once set on wall , see 5th diagram.

Diagram 5

4.      Plug the unit into electrical wall outlet.

5.      Select speed setting:

·        Speed 1. Very quiet operation, this is an usual speed for a continuous filtration and regular air purification.

·        Speed 2.  Medium speed, also for continuous filtration in moderate air polluted environment.

·        Speed 3.  Maximum output provides deeper cleaning in case of momentary pollution.

 

PLEASE NOTE: For best results we recommend your run the Air Purifier for 48 hours before it reaches its optimal performance.

 

Care and Cleaning

With proper care and maintenance your PURLINE Air Purifier should serve you for many years to come.

 

OUTER HOUSING- Dirt and dust that settles on the unit due to the ionization process, as well as fingerprints, can be wiped away with a clean, soft moist cloth. Do not use cleaning agents or abrasive materials. Use a cotton swab to wipe dust accumulation from between the grilles.

PRE-FILTER AND PHOTO-OXIDATION FILTER: use a vacuum cleaner.

    

 

NOTE: Do not clean the BIOSTOP/ active carbon/HEPA filter it needs to be replaced.

 

Filter replacement

For best results  the BIOSTOP/carbon/HEPA filter cartridge needs to be replaced regularly.  Under normal conditions, it is expected to last from 6 months to 2 years according to usage.

If you use the air purifier in an environment where there is high concentration of air pollution and at high speed, you will probably need to change the BIOSTOP/carbon/HEPA filter more often. If it is used in a cleaner environment and at low speed it will last longer. Frequent cleaning of the pre-filter will extend the life of the main filter and the BIOSTOP Biological Screen.

 

Filtering Cartridge replacement ( Pur118 BM)

1.      Turn off and disconnect the unit from the electrical wall outlet.

2.      Remove the frontal grille by releasing the two side locking tabs.

3.      Remove carefully the new filter from its protective plastic wrapping.

4.      Slide the filter all the way into the unit: the HEPA filter side (white) towards the frontal admission grille. The carbon filter side (black) towards the unit back.

5.      Ensure that the two admission grille bottom tabs are engaged into unit bottom slots.

6.      Put admission grille back on unit front.

7.      The filter will need to be changed every 3 to 6 months.

8.      You may use the “replacement sticker” to record date of filter replacement.

 

Technical Specifications

 

 

                   PLS2100BM

Control Panel  Rectangular

Covered Area About  40 m²

Input Voltage 220/240V – 50Hz

Dual carbon/HEPA filter Yes

Dimensions :W D H 46.6 x 16.2 x 38.6 cm

Net Weight            4,8 Kg

Timer:                         Yes

Speed                             3

Air output (max.) 168m3/hour

Power Consumption(max.)      40 W

Photo-oxidation UV     No

Remote Control           No

Negative Ionization     Yes

Standards           GS/TUV

Filter Ref.      PUR118BM

Dust filter                    Yes

 

Troubleshooting

Always switch off and disconnect the power supply cord from electrical outlet prior to handling the unit.

 

Inadequate Air Output

The filter needs to be replaced?

Are the air openings blocked?

 

The unit does not work

Check: Plug, Fuse, Power failure?

Contact serviceman.

 

Air Purifier too loud

Fan in contact with “foreign object”

Check anti-vibrations sponges

Check unit installation

 

Guarantee:

2 YEARS TO FIRST BUYER.

TO INSURE OF RIGHTS TO GUARANTEE PRIVILEGES, PLEASE INSURE  TO INCLUDE WITH CLAIM YOUR PROOF OF PURCHASE SHOWING PURCHASE DATE.

 

 

Filter replacement reminder Label

 

WRITE DATE OF LAST FILTER REPLACEMENT

 

_____________                  ___________           ___________

 

Day                                        Month                                     Year

 

Apply label inside or outside the unit

 

                       

Replace filter after one year of use or if the colour of the filter is darker than above