PurLine

HIGH VELOCITY FAN

Owner’s manual

Please read and save these instructions

WinEurope - FRANCE

Thank you for choosing a PurLine high velocity fan. With normal care and maintenance, this fan will provide many years of satisfactory performance.

As with all electrical appliances, it is recommended that you note the following guidelines before use :

- Use this fan only as described in this manual. Other use not recommended may cause fire, electrical shock…

- This product is intended for household use, do not place fan in window, immerse unit, plug or cord in water or spray with liquids.

- Close supervision is necessary when any appliance is used by or near children.

- Unplug the fan from the power supply when not in use, when moving fan from one location to another and before cleaning.

- Do not operate fan in the presence of explosive and/or flammable fumes.

- Do not use the fan with a damaged cord, plug, after a malfunction or if dropped or damaged in any manner.

- Avoid contact with moving fan parts.

- To disconnect, hold the plug and pull it from the wall outlet. Never yank the cord.

- The use of attachments not recommended by us may be hazardous.

- Always use on a dry level surface.

- Do not operate if the fan housing is removed or damaged.

- Always plug unit directly into a wall socket.

- Do not use outside.

- Always insure current supply is as indicated on serial plate

WARNING: To reduce the risk of fire or electrical shock, DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED CONTROL DEVICE.

ASSEMBLY INSTRUCTIONS (Fig. B)

-Model BC-46BS (FE4-45S2do)

Position column onto base, fasten the screws.

Insert Fan Head assembly into top part of column making sure the cover is inserted to cover the screws. Tighten securing hand screw to proper column position.

OPERATION

Set your fan on a level dry surface

Plug the power cord into 230 Volt AC wall socket.

Your high Velocity Fan features a multi-speed airflow selector switch, which allows you to select the desired amount of air and its velocity. Airflow settings are as follows:

Speed I= low

Speed II= Medium

Speed III= High

0=Off

Thermostat Option

Some Fan units (TH---models) are equipped with a thermostat which enables the automatic start and stop of the fan according to temperature conditions.

The thermostat is in function at all times regardless of the knob position and controls the fan operation from 0° to 55°C. The unit will not operate if the ambient temperature is less than 0°C. It is also not recommended to use the fan in such condition.

It is recommended to set the thermostat switch dial at the proper required temperature level for comfort conditions.

Note : please wait a few moments (about 5 min, according to ambient temperature) to allow the fan to start after attributing a consigned temperature setting.

The thermostat is designed to stop the unit to function when the ambient temperature goes below the set point of the dial switch. If the ambient temperature remains high, the fan should normally function continuously regardless of the set point.

When starting the unit, set the thermostat on the lowest position (1) and set the fan speed switch to a desired position ( I & II or III).

The fan will work continuously until the surrounding temperature becomes sufficiently low for the thermostat to de-activate the electrical current supply .

The thermostat is designed to help the high velocity fan regulate the temperature. The user will determine himself his comfort level and set the thermostat dial switch accordingly (position 1 to 9).

Once this temperature level is established, the fan will start or stop automatically with an acceptable margin of + / - 5°C.

During the summer months, your high velocity Air Circulator can be used alone or in conjunction with an air conditioning unit to circulate the cooled air or to force the air into other rooms.

During winter months, your fan can be used to enhance the distribution of the heated air in your home.

The motor is thermally protected and will automatically shut off the fan should it overheat for any reason. If this occurs, immediately unplug the fan from the electrical supply.

CLEANING AND MAINTENANCE

CAUTION: Always turn the unit off and unplug it from power supply.

The guard and stand can be easily cleaned with a soft moist cloth and mild cleanser. The motor bushings are permanently lubricated at the factory and do not require any additional lubrication. Do not let water enter into the electrical parts. In the event that the supply cord becomes damaged, in order to avoid any hazard, it must be replaced by either the manufacturer, its service agent or other qualified party.

TECHNICAL SPECIFICATIONS

Dimensions Tension Power

BC-3012 (Blue) 30 cm 230 v / 50 Hz 55 W

BC-3012N (Black) 30 cm 230 v / 50 Hz 55 W

BC30CHR (All Chrome) 30 cm 230 v / 50 Hz 55 W

BC-4618 (Blue) 46 cm 230 v / 50 Hz 180 W

BC-4618N (Black) 46 cm 230 v / 50 Hz 180 W

BC46CHR (All Chrome) 46 cm 230 v / 50 Hz 180 W

BC-4618XTH (thermostat) 46 cm 230 v / 50 Hz 180 W

BC-46BS (pedestal) 46 cm 230 v / 50 Hz 180 W

BC-51BS (pedestal) 51 cm 230 v / 50 Hz 240 W

BC-51BSTH (thermostat) 51 cm 230 v / 50 Hz 240 W

Supply cord with 16 A grounded plug.

WARRANTY

The warranty conditions applicable to this product are set out by our representative in the country of sale. Details of the warranty may be obtained from the dealer from whom the unit was purchased. Please note that a proof of purchase will be required for warranty claims.