EN

PREMIAIR

HIGH VELOCITY FANS

PRIM30 - PRIM40 – PRIM46

Owner’s

manual

WinEurope - FRANCE.

Email : info@purline.com

Internet : www.purline.com

Please read and save these instructions

Thank you for choosing a PREMIAIR high velocity fan. With normal care and maintenance, this fan will provide many years of satisfactory performance.

As with all electrical appliances, it is recommended that you note the following guidelines for use:

- Use this fan only as described in this manual. Other use not recommended may cause fire, electrical shock…

- This product is intended for household use, do not place fan in window, immerse unit, plug or cord in water or spray with liquids.

- Close supervision is necessary when any appliance is used by or near children.

- Unplug the fan from the power supply when not in use, when moving fan from one location to another and before cleaning.

- Do not operate fan in the presence of explosive and/or flammable fumes.

- Do not use the fan with a damaged cord, plug, after a malfunction or if dropped or damaged in any manner.

- Avoid contact with moving fan parts.

- To disconnect, hold the plug and pull it from the wall outlet. Never yank the cord.

- The use of attachments not recommended by us may be hazardous.

- Always use on a dry level surface.

- Do not operate if the fan housing is removed or damaged.

- Always plug unit directly into a wall socket.

- Do not use outside.

- Always insure current supply is as indicated on serial plate

- If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

WARNING: To reduce the risk of fire or electrical shock, DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED CONTROL DEVICE.

OPERATION

1. Set your fan on a hard level and dry surface

2. Be sure that the multi-speed airflow selector switch is on 0 (=Off). The selector switch is at the back of the unit

3. Plug the power cord into 230 Volt AC wall socket.

4. Your high Velocity Fan features a multi-speed airflow selector switch, which allows you to select the desired amount of air and its velocity. Airflow settings are as follows:

I= low

II= Medium

III= High

0=Off

ANGLE ADJUSTMENT

In order to change the fan angle, simply pull softly on it.

It is possible to firm up the holding in the position by tightening the adjusting nuts.

CLEANING AND MAINTENANCE

CAUTION: Always unplug the unit from power supply.

The guard and stand can be easily cleaned with a soft moist cloth and mild cleanser. The motor bushings are permanently lubricated at the factory and do not require any additional lubrication. Do not let water penetrate inside the motor housing.

TECHNICAL SPECIFICATIONS

	PRIM30	PRIM40	PRIM46
DIAMETER	30 CM	40 CM	46 CM
MAXIMUM RATED POWER	35 W	60 W	70 W

WARRANTY : 2 YEARS TO FIRST BUYER.

TO RECLAIM YOUR WARRANTY , PLEASE RETURN UNIT OR SHIP BACK PREPAID FREIGHT TO YOUR DEALER WITH PROOF OF PURCHASE DATED.